CN
ENG
Zhejiang ENOCH Electric Co., Ltd. has been deeply engaged in the power industry for more than 20 years, specializing in the research and development, production, sales and digital intelligent power operation and maintenance services of 35kV and below transmission and transformation intelligent power equipment.
联系热线：
188-678-10666
25kV200A plug-in cable connector is a fully insulated, fully sealed plug-in terminal head that can be touched with electricity. It is widely used in the connection of outdoor distribution transformers, American box transformers, ring network cabinets, cable branch boxes, buried transformers and other electrical equipment. Installed on the outgoing side of the T-II type cable head 200A, on the 200A busbar, and the single-pass (or double-pass) bushing connector and load transfer connector of the American box transformer. The test point can be installed with a live display or fault indicator to query the live state and fault state of the equipment. It uses high-quality EPDM (ethylene propylene diene monomer rubber) insulation, and the conductive rod connector has arc extinguishing material, so it can be operated in a live state, but it cannot cut off the short-circuit current; it can be used as a load switch to interrupt the current of 200A. Suitable for 25kV cross-linked polyethylene cables with a cable section of 35 mm²~120 mm.
25kV200A plug-in cable connector is a fully insulated, fully sealed plug-in terminal head that can be touched with electricity. It is widely used in the connection of outdoor distribution transformers, American box transformers, ring network cabinets, cable branch boxes, buried transformers and other electrical equipment. Installed on the outgoing side of the T-II type cable head 200A, on the 200A busbar, and the single-pass (or double-pass) bushing connector and load transfer connector of the American box transformer. The test point can be installed with a live display or fault indicator to query the live state and fault state of the equipment. It uses high-quality EPDM (ethylene propylene diene monomer rubber) insulation, and the conductive rod connector has arc extinguishing material, so it can be operated in a live state, but it cannot cut off the short-circuit current; it can be used as a load switch to interrupt the current of 200A. Suitable for 25kV cross-linked polyethylene cables with a cable section of 35 mm²~120 mm.
Cable connector, test point cap, ground wire
Plug-in rod
Knife wrench
Cleaning paper
Silicone grease
Crimp terminal
Installation guide
Product certificate
3 pieces/box weight: 9kg
Volume: 43cmx30.5cmx9cm
